Optimum Opti Dual Pro Applicator
Finally, the perfect applicator for Optimum Opti-Seal and Opti-Coat 2.0!
The Optimum Opti Dual Pro Applicator is a double-sided applicator designed to make application of Optimum’s coating and spray sealant effortless. With its dual sides, one for application of Opti-Coat 2.0 and the other for Opti-Seal, this one applicator not only takes the place of two separate applicators, but it does a better job too! The Optimum Opti Dual Pro Applicator is slotted between the two layers to ensure it doesn’t slip out of your hand while in use.
The Optimum Opti Dual Pro Applicator features two sides, each with their own intended use. The uber soft foam side features 100 pores per square inch and is designed for application of Opti-Seal or other WOWA (wipe on walk away) spray sealants. The high density neoprene side is designed for application of Optimum Opti-Coat 2.0, a permanent paint coating. Both products are designed to be applied extremely thin and the Opti Dual Pro Applicator ensures no product is wasted.
For the application of Opti-Seal, spray directly onto the uber soft foam side and spread on the exterior surfaces of your vehicle. For the application of Opti-Coat 2.0, dispense directly from the syringe to form an X pattern on the high density neoprene side and apply to all surfaces to be coated.
The Optimum Opti Dual Pro Applicator is washable and reusable.
4 inch x 1.5 inch
Sold individually.
Discontinued.
The Optimum Opti Dual Pro Applicator is a double-sided applicator designed to make application of Optimum’s coating and spray sealant effortless. With its dual sides, one for application of Opti-Coat 2.0 and the other for Opti-Seal, this one applicator not only takes the place of two separate applicators, but it does a better job too! The Optimum Opti Dual Pro Applicator is slotted between the two layers to ensure it doesn’t slip out of your hand while in use.
The Optimum Opti Dual Pro Applicator features two sides, each with their own intended use. The uber soft foam side features 100 pores per square inch and is designed for application of Opti-Seal or other WOWA (wipe on walk away) spray sealants. The high density neoprene side is designed for application of Optimum Opti-Coat 2.0, a permanent paint coating. Both products are designed to be applied extremely thin and the Opti Dual Pro Applicator ensures no product is wasted.
For the application of Opti-Seal, spray directly onto the uber soft foam side and spread on the exterior surfaces of your vehicle. For the application of Opti-Coat 2.0, dispense directly from the syringe to form an X pattern on the high density neoprene side and apply to all surfaces to be coated.
The Optimum Opti Dual Pro Applicator is washable and reusable.
4 inch x 1.5 inch
Sold individually.
Review Summary
4.2
5 Reviews
5
40% (2)
4
40% (2)
3
20% (1)
2
0% (0)
1
0% (0)
40% Recommend this product (2 of 5 responses)
By Adam
Alta Loma, CA
Work ok
July 23, 2016
Does what it is suppose to
Applies product fairly well.
Would like square or rectangular option for getting into tight spots and follow edges more cleanly. Supply as two pieces or do a better job bonded the two sides.
By Jamie R.
Dallas, TX
Good Applicator
September 4, 2015
I've only used this applicator for applying OptiCoat 2.0 but it did a great job. It allowed the opticoat to go on evenly and I had absolutely no issues with high spots. I feel this applicator really minimizes waste of the coating due to the dense foam over the standard yellow applicator opticoat comes with. I would buy it again but won't need to immediately since it is washable and I can re-use it again.
Provides an easy way to evenly apply opticoat
It is a bit stiff which makes getting into some areas more difficult
Feels a bit sticky over the surface and at times I felt like I might tear the two halves of the applicator apart
By John
Great for optiseal
November 12, 2013
This applicator was great for optiseal. I would suggest using the supplied yellow pad for applying opticoat. Also comes apart after a couple uses.
By VGA1
Opti
August 27, 2012
The best applicator for o.c.
By William
Opti-Coat 2.0 Applicator
August 24, 2012
To me this is the easiest way to apply Opti-Coat.I know there are other ways that work fine, I have used some of them.
This product has a nice handle and provides smooth applications.
This product has a nice handle and provides smooth applications.