Workshop Solutions Tradesman's Work Cart
A time and space saving cart!
The Workshop Solutions Tradesman’s Work Cart is a multi-purpose utility car slash bucket dolly designed to make detailing easier than before. Constructed with nearly indestructible material, the Workshop Solutions Tradesman’s Work Cart helps save you precious workspace, while also allowing you to detail on wheels.
When you are getting deep into the depths of detailing, car washing to be exact, sometimes you need more room than what just an ordinary dolly could provide. Sometimes, you need room for your five-gallon bucket and for additional products and tools. In these situations, you would need a work cart like the Workshop Solutions Tradesman’s Work Cart.
The Workshop Solutions Tradesman’s Work Cart features shelves measuring at 13 ¾ width, 31” length and 18 1/4” high. There is a 9” clearance on the shelves to allow for storage of your favorite products, so that you have them with you when detailing. There is a special spot on the Workshop Solutions Tradesman’s Work Cart for your 5-gallon buckets, so that you have your bucket of water with product readily available to take around the vehicle with you. If it being on wheels wasn’t good enough, this work cart has a sturdy handle so you can easily and conveniently pull the cart around with you.
The fact that the Workshop Solutions Tradesman’s Work Cart has two shelving areas means that you can not only keep the products with you as you work, but it can continue to be used to easily store your products even when in your garage. That way, not only are you saving space, but the cart is already set to be used another time. The Workshop Solutions Tradesman’s Work Cart is constructed with HDPE material meaning it is non-conductive and non-corrosive, so it will not stain, scratch, dent or even rust.
Discontinued.
The Workshop Solutions Tradesman’s Work Cart is a multi-purpose utility car slash bucket dolly designed to make detailing easier than before. Constructed with nearly indestructible material, the Workshop Solutions Tradesman’s Work Cart helps save you precious workspace, while also allowing you to detail on wheels.
When you are getting deep into the depths of detailing, car washing to be exact, sometimes you need more room than what just an ordinary dolly could provide. Sometimes, you need room for your five-gallon bucket and for additional products and tools. In these situations, you would need a work cart like the Workshop Solutions Tradesman’s Work Cart.
The Workshop Solutions Tradesman’s Work Cart features shelves measuring at 13 ¾ width, 31” length and 18 1/4” high. There is a 9” clearance on the shelves to allow for storage of your favorite products, so that you have them with you when detailing. There is a special spot on the Workshop Solutions Tradesman’s Work Cart for your 5-gallon buckets, so that you have your bucket of water with product readily available to take around the vehicle with you. If it being on wheels wasn’t good enough, this work cart has a sturdy handle so you can easily and conveniently pull the cart around with you.
The fact that the Workshop Solutions Tradesman’s Work Cart has two shelving areas means that you can not only keep the products with you as you work, but it can continue to be used to easily store your products even when in your garage. That way, not only are you saving space, but the cart is already set to be used another time. The Workshop Solutions Tradesman’s Work Cart is constructed with HDPE material meaning it is non-conductive and non-corrosive, so it will not stain, scratch, dent or even rust.
Items You Might Need
Review Summary
5.0
1 Reviews
5
100% (1)
4
0% (0)
3
0% (0)
2
0% (0)
1
0% (0)
100% Recommend this product (1 of 1 responses)
By Terry M.
West Michigan
A great multi-purpose cart!
February 24, 2022
I purchased this cart to combine three detailing tools into one; my two bucket wash dolly, my rolling work stool, and my detailer’s cart. My ageing knees made it more and more difficult to get up and down from my low stool to retrieve tools and supplies. The Workshop Solutions Tradesman’s Cart enabled me to sit higher (18”) and fixed my problem. The cart’s heavy-duty design is equipped with high quality 5-inch wheels, which easily roll over rough surfaces and concrete expansion cracks. It’s two front wheels rotate 360 degrees with the rear wheels being stationary. One swivel wheel provides a lock to keep the cart from rolling on inclines. A flip up handle makes pulling the cart around a vehicle a snap. It’s also easy to move around while seated and pushing the cart with your feet.
This high-quality cart is made of heavy duty, high density, polyethylene (HDPE) thermo polymer plastic which has high tensile strength and impact resistance. To assemble the cart, you’ll need: #2 and #3 Phillips head screwdrivers and a socket wrench with ?” socket. All assembly hardware is included. The assembly instructions lack detail leaving you to sort through the process of fitting fasteners in appropriate places and orientations. Other than that, assembly was easy.
The upper shelf/seat is large enough to hold a second 5-gallon wash bucket along with other cleaning supplies when not using it a seat. This enables the cart to be used for two-bucket washes. The lower shelf has several molded compartments for storing small parts and hand tools as well as a 5-gallon bucket. There are several places on the front and rear edges of the shelf/seat that allow 32 oz. spray bottles to hang by their triggers. When not using it for two-bucket washing, I swap out the wash bucket for a bucket filled with my tools and use it for other detailing processes. This well-constructed product can be easily configured for a variety of tasks. Overall, I’m very happy with quality and versatility of this purchase.
Combines three tools into one.
Large wheels don't hang up on rough surfaces and driveway cracks.
Very High quality product.
Storage space under the upper shelf/seat is limited.
This high-quality cart is made of heavy duty, high density, polyethylene (HDPE) thermo polymer plastic which has high tensile strength and impact resistance. To assemble the cart, you’ll need: #2 and #3 Phillips head screwdrivers and a socket wrench with ?” socket. All assembly hardware is included. The assembly instructions lack detail leaving you to sort through the process of fitting fasteners in appropriate places and orientations. Other than that, assembly was easy.
The upper shelf/seat is large enough to hold a second 5-gallon wash bucket along with other cleaning supplies when not using it a seat. This enables the cart to be used for two-bucket washes. The lower shelf has several molded compartments for storing small parts and hand tools as well as a 5-gallon bucket. There are several places on the front and rear edges of the shelf/seat that allow 32 oz. spray bottles to hang by their triggers. When not using it for two-bucket washing, I swap out the wash bucket for a bucket filled with my tools and use it for other detailing processes. This well-constructed product can be easily configured for a variety of tasks. Overall, I’m very happy with quality and versatility of this purchase.
